Description
Single And Double CHAIN CLAMPS For Aligning And Reforming Pipes
Length of chain required for the pipe range
Chain pipe alignment clamps provide welders with the strength and ability to align and lightly reform pipes. These clamps are designed to securely hold pipes in place during welding, allowing for precise and accurate welds.
Single Chain Clamps
Double jackscrew clamps for aligning and reforming pipes.
ALL CLAMPS INCLUDE
Length of chain required for the pipe range
Double jackscrew jackbars listed for the pipe range
Main block
Fine adjustment
Fitting alignment device
Jackscrew wrench
Parts and operating manual
Metal Storage box
Hi-Lo gauge
PRODUCT FEATURES
ALIGNMENT:
Can align all pipe schedules accurately
REFORMING:
Jackscrews enable the elimination of ‘Hi-Lo’ points either side of the weld joint. Can reform up to schedule 40 pipes.
ADAPTABILITY:
One chain clamp covers the range of 8 cage clamps.
NO TACK JACKBARS:
Joints can be fully welded without removing the clamp.
VERSATILITY:
Elbows, tees and other fittings can be accurately aligned using the fitting alignment device.
QUALITY:
Jackbars are cast from high quality steel alloys.
ADDITIONAL JACKBARS:
Can be added if extra pressure is required.
JACKSCREWS:
Jackbars have two jackscrews with independently pivoting pads to compensate for uneven surfaces.
MATERIALS:
Available in both carbon and stainless steel versions.
GBC Chain Clamps must not be used as a lifting device. Fittings must be independently supported at all times.
RANGE:
SCC12: Pipe Diameter Range (inch/mm) 4-12 / 101.6-323.9, No. Of Jackbars: 4
SCC12SS (stainless steel): Pipe Diameter Range (inch/mm) 4-12 / 101.6-323.9, No. Of Jackbars: 4
SCC24: Pipe Diameter Range (inch/mm) 4-24 / 101.6-609.6, No. Of Jackbars: 7
SCC24SS (stainless steel): Pipe Diameter Range (inch/mm) 4-24 / 101.6-609.6, No. Of Jackbars: 7
SCC36: Pipe Diameter Range (inch/mm) 10-36/254 – 914.4, No. Of Jackbars: 8
SCC36SS (stainless steel): Pipe Diameter Range (inch/mm) 10-36/254 – 914.4, No. Of Jackbars: 8
SCC48: Pipe Diameter Range (inch/mm) 10-48 / 254-1219.2, No. Of Jackbars: 12
SCC48SS (stainless steel): Pipe Diameter Range (inch/mm) 10-48 / 254-1219.2, No. Of Jackbars: 12
Single Chain Clamps Pictures
Double Chain Clamps
Ultra heavy-duty double chain reforming alignment clamps.
ALL CLAMPS INCLUDE
Length of chain required for the pipe range
Extra heavy-duty jackbars listed for the pipe range
Number of Main blocks listed for the pipe range
Two (2) fine adjustments
Fitting alignment device (larger clamps supplied with come-a-long)
Jackscrew wrench
Operating instructions
Hi-Lo gauge
OPTIONAL
Torque wrench
Carbon or stainless steel spacing screws
Additional jackbar
PRODUCT FEATURES
PRECISION ALIGNMENT:
The double jackbars, spaced around the outside diameter of the pipe, provide accurate alignment and reforming of the internal or external diameters of both pipes within 0.5mm.
EXTREME TOUGHNESS:
Reforms pipes on both sides of the weld joint to Sch80, and elbows, tees and other fittings.
ADAPTABILITY:
The Chain Clamp can be used to support, align, and reform elbow, tees and other fittings that a cage clamp cannot cope with. One Chain Clamp covers the range of eight (8) cage clamps.
EXTRA HEAVY DUTY INDEPENDENT JACKBARS:
Enable the operator to form the pipe to the required shape. Each Jackscrew has independently pivoting feet to cope with uneven surfaces.
VERSATILITY:
Elbows, tees and other fittings can be aligned with the Fitting Alignment Device.
Double chain clamps must not be used as a lifting device.
When using the Fitting Alignment Device fittings must be independently supported.
RANGE:
DCC24: Pipe Diameter Range (inch/mm) 10-24 / 254-609.6, No. Of Jackbars: 7
DCC24SS (stainless steel): Pipe Diameter Range (inch/mm) 10-24 / 254-609.6, No. Of Jackbars: 7
DCC36: Pipe Diameter Range (inch/mm) 10-36 / 254-914, No. Of Jackbars: 9
DCC36SS (stainless steel): Pipe Diameter Range (inch/mm) 10-36 / 254-914, No. Of Jackbars: 9
DCC48: Pipe Diameter Range (inch/mm) 10-48 / 254-1219, No. Of Jackbars: 12
DCC48SS (stainless steel): Pipe Diameter Range (inch/mm) 10-48 / 254-1219, No. Of Jackbars: 12
DCC60: Pipe Diameter Range (inch/mm) 10-60 / 254-1524, No. Of Jackbars: 16
DCC60SS (stainless steel): Pipe Diameter Range (inch/mm) 10-60 / 254-1524, No. Of Jackbars: 16
DCC72: Pipe Diameter Range (inch/mm) 10-72 / 254-1829, No. Of Jackbars: 20
DCC72SS (stainless steel): Pipe Diameter Range (inch/mm) 10-72 / 254-1829, No. Of Jackbars: 20
Double Chain Clamps Pictures
Various sizes of single and double chain clamps made from stainless steel or steel materials are available. These chain clamps are ideal for use in various industries such as oil and gas, shipbuilding, and construction. They can be used to align and join pipes of different diameters and can also be used for cutting and beveling pipes.
The benefits of using chain pipe alignment clamps include their durability, easy to use design, and ability to reduce the time and effort required for pipe welding.
Full details and available models in the technical data sheet.
